MPEG LA 16CH Manuel d'utilisateur télécharger pdf (Page 17)

ADVANCED OPERATION

1) SERIAL TYPE (Selected models only)

Press “UP” / “DOWN” button to set the serial type of the DVR (RS485).

2) BAUDRATE (Selected models only)

Set the baud rate of the DVR (2400 / 9600 / 19200 / 57600 / 115200).

3) HOST ID (Selected models only)

Set the ID of the DVR (0 ~ 254).

4) PASSWORD

Press “ENTER” to reset the password for accessing the DVR system. You can set the password up to 4 digits.

Note: Users who use guest password to access the DVR will be only allowed to view the live streaming

video and sequence display, shift the channel display, and lock keys.

5) RESET DEFAULT

Press “ENTER” to reset all settings as default, and select “YES” to confirm or “NO” to cancel.

6) CLEAR HDD

Select the HDD you want to clear. Press “ENTER”, and select “YES” to confirm to clear HDD or “NO” to cancel.

7) UPGRADE

Before using the USB flash drive, please use your PC to format the USB flash drive as FAT32 format first. Then,

save the upgrade file in a compatible USB flash drive, and insert it into the USB port at the front panel. Press

“ENTER”, and select “YES” to confirm upgrade or “NO” to cancel.

Note: To use this function, you need to have the upgrade file saved in a compatible USB flash drive, and

insert it into the USB port at the front or rear panel.

Note: Do not disconnect the power of your DVR while the upgrade process is in progress, or the DVR

functions may not work normally or be unable to use.

8) AUTO KEYLOCK (SEC)

Set the time-out in second after which the key lock function is activated (NEVER / 10 / 30 / 60).

9) LANGUAGE (Support multi-language)

Select the language of the OSD.

10) VIDEO FORMAT

Here shows the information of the DVR video format (NTSC / PAL).

11) VERSION

Here shows the firmware version information.

5.7. NETWORK (Selected models only)

In this menu list, you can set up the network.

Move to “NETWORK”, and press “ENTER” button to enter the submenu. The submenu items are described below.

5.7.1. STATIC

1) NETWORK TYPE

Select the network type as STATIC and set all the information needed in the DVR.

2) NETWORK INFORMATION (IP / GATEWAY / NETMASK)

Key in all the network information obtained from your ISP (Internet Service Provider).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Pas de commentaire

MPEG LA 16CH Manuel d'utilisateur Page 17